1/16" Blade For Ren-O-Thin Power Rakes And Mataway® De-Thatchers And Overseeders, 516900
Steel fixed blade or knife for heavy duty turf, breaking up thatch to promote growth. Blades attach to a horizontal reel and can be easily changed without tools.
- 1/16 inch thick
- 1 inch or 1.5 inch spacing
New Blade Installation
Blades are removed from the reel by removing the pillow block and the reel nut on the end of the reel, opposite the drive pulley. Notice how the blades are spaced before removing them to assure proper installation of the new blades.
When reassembling the reel, it is important to start and end with a spacer. DO NOT assemble with a blade next to the shaft nut.
When installing new blades, note the hexagon shape of the shaft. Install the first blade onto the shaft, then rotate the next blade so it is one lobe forward (60 degrees off center) from each previous blade. Keep installing the blades in this order until all blades are installed. Mount the reel shaft, with new blades in the reverse order it was removed. After 4 hours of use, check reel nut for proper torque.
WARNING: This product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov